Yes , the installation of CiES FAA TSO fuel quantity systems into most type certificated GA aircraft is approved under a FAA AML STC. Based on the success of our proven TSOA process and commercial success in OEM programs, the FAA authorized STC installation of the CiES digital fuel senders as a replacement for existing resistance or capacitance based fuel quantity in GA aircraft interfacing with modern cockpit instrumentation. We are working on adding other aircraft and instrumentation on the STC.
Pricing is per application but the senders average $395 to $425 in each location. These new manufacture digital senders are competitively priced. They are typically available in less that 1 week lead time.
CiES has a variety of outputs and configurations as we
can output a digital signal to:
Aerospace Logic - FL20XD series
JPI 900 or 930 / 960
EI CGR-30 & MVP-50
Or an analog signal to:
Aerospace Logic - Voltage
Contact CiES for interface with a standard analog gauge.
Cessna 170, 172, 175, 177, 180, 182, 185, 206, 207
Piper PA-22, PA-23, PA-24, PA-28, PA-30, PA-31, PA-32, PA-34, PA-44
Beech 33,35,36,55, 58
More aircraft to follow. Your aircraft must have been equipped with a removable resistive or capacitive sender at time of manufacture to be applicable.
Are these similar to the Electronics International Magnetic Senders?
While the basic concept of detecting magnetic field is similar, the method CiES uses is completely different.
Electronics international uses a Hall effect sensor, while CiES holds the patent to utilize a more sophisticated Anisotropic Magneto Resistive (AMR) sensor.
The automotive industry relies on AMR technology for critical systems like steer-by-wire, throttle-by-wire and brake-by-wire. Due to their incredible accuracy and stability they are used on the camshaft and crankshaft of cars to allow "Stop Start" functionality.
CiES fuel senders, and only CiES fuel senders utilize an "on-board" brain to process the fuel quantity information and provide a stable output.
The combination of stable, accurate and reliable sensing and the "on-board" processing allows CiES to meet the most critical transport level fuel accuracy requirements
The STC requires that the CC2840 Series digital fuel senders to replace the existing fuel level senders. The CC2840 Series digital fuel level requires aircraft power to operate. A protected power wire needs to be added from the aircraft electrical bus.
In most GA aircraft the sender is mounted to the tank structure in a standard 5 bolt pattern. We utilize this same pattern in our billet machined sender housings. In most fuel sender applications this is a bolt in replacement
Initially, this will depend on the installer’s rates and experience. The CC2840 series fuel sender was originally designed to be installed by aircraft manufacturers. Mechanics will be impressed by how easy it goes in. It physically bolts into the same location and only requires an additional power wire.
Installation times for a Cirrus run SR22 25 hrs, Beech Bonanza's typically run up to 16 hrs Cessna aircraft are usually accomplished in a day.
STC installations ultimately require approval from an A&P with Inspection Authorization (IA), and will require an FAA form 337. Aircraft owners who work on their aircraft under the supervision and approval of an appropriately rated mechanic could apply this STC to their aircraft in that manner.
We are currently in production with the CC2840 Serioes digital fuel sender. The STC is available from CIES , .
Yes, They are the same product and have the similar capabilities. We re-purposed a jet fuel temperature output to allow a low fuel annunciation in the STC sender.
Typically, installing an CC2840 Series senders changes the aircraft weight less than the senders they are replacing
Does the CC2840 digital fuel sender have TSO Approval? Does CiES have PMA?
Yes. the TSO insures a quality and repeatable fuel level output under all aircraft conditions and the STC demonstrates that these senders are suitable for use in specific type certificated aircraft. This is the only TSO'd fuel sender available for retrofit in GA aircraft. TSO approval insures that the product manufacturing has been accomplished in FAA approved quality system, as such, TSO products do not require PMA.
What is the pedigree of the CiES CC2840 Series Fuel Sender ?
CiES and Cirrus Aircraft, CiES launch partner successfully demonstrated that CiES aviation-proven manufacturing and development process yielded a superior product that is suitable for use in all type certificated aircraft. CiES is qualified to RTCA DO-254 and the digital fuel senders exposed to the aircraft environmental conditions for wing mounting by RTCA DO-160.
How reliable is the CiES fuel sender?
CiES fuel senders have amassed over 580,000 hrs of operation on Cirrus Aircraft with only two removals out of 12,500 senders for cause. This reliability exceeds every other system on the Cirrus aircraft. Cirrus is so impressed that they specified CiES technology on the Cirrus Jet.
To back that amazing reliability we warrant the senders for non-transferable life.
Original resistive aircraft fuel senders were designed to measure approx. 20 gallons and provide a resolution of 0.3 of a gallon between readings.. These resistive senders were intended for automotive and farm machinery applications. The aircraft application places additional stresses on these commercial products, from moisture born corrosion to large movements in fuel in and out of plane of the sender. Cies designed a aviation grade fuel sender from the outset. We addressed the moisture and corrosion issues, we addressed fuel motion in all axis and we designed a system to give excellent resolution less than (1/10 of a gallon) for fuel tanks that can hold hundreds of gallons of fuel.
A functional fuel gauge is required by regulation. While some in aviation cast a broad net on what working means, according to the FAA it means the ability to accurately show usable fuel in each tank. Gauges that waver or show merely a trend in operation are not functional. Fuel gauges are required as it takes the fundamental issue of pilot impression of starting fuel level out of the equation.
While even some in the FAA Flight Standards Offices quote this as verbatim truth, it is absolutely not true. CiES works with all of the FAA ACO offices and the FAA Small Aircraft directorate. Usable fuel is an accurate value for every certificated aircraft flying. So yes zero usable fuel is an accurate number, but so is full usable fuel (that value is on the fuel filler placard and in your POH). Using simple math 1/2 usable fuel is also an accurate number. The zero fuel accurate myth is just that, myth.
If you pair the CiES digital senders with a digital instrumentation, we typically see usable fuel remaining numbers within a gallon of a properly calibrated fuel totalizer in level flight and still air. The CiES remaining fuel value will be more accurate the closer the fuel gauge gets to zero. Analog instrumentation and interface will give slightly less accuracy. Note: There are issues that are part of the aircraft fuel tank design such as sender overlap on multi sender fuel tanks or excessive restriction of fuel flow in a multi element tanks that may cause fuel indication issues.
While CiES designed the sender to be able to output to a resistance input analog fuel gauge, there are several issues that make this interface less than ideal.
First - an analog gauge has its own characteristic and that has to be matched to the tank characteristic. This would be, at present, a remove, reprogram and replace
proposition until the gauge and tank content correlate.
New cockpit gauging is programmable so this issue is not present.
Second - Analog gauging for fuel applied to aircraft utilized gauge interfaces that were not designed to be accurate. We see gauge hysteresis and variations that make accurate fuel reporting nearly impossible. CiES is committed to accurate fuel gauging in aircraft, and these interfaces do not allow that to easily occur.
Note: if the original aircraft gauge is the only interface that will work for your aircraft, CiES is working on two potential solutions. One will require rebuilt or qualified aircraft gauging, the other replaces the existing pointer driver with a stepper motor.
What we know, is that due to our business with Cirrus and being outfitted on new SR20 and SR22 aircraft since 2012 we now have a growing number of aircraft where fuel indication is proven to be reliable and accurate.
While older Cirrus aircraft, all of which have totalizers, suffer and continue to suffer fuel accidents. This fleet of new aircraft has not suffered a single fuel incident.